Speaker reference
Jamo S809 Specifications and Setup Checklist
Find the original published specs, then check your own speakers before setup.
Jamo S 809 at a glance
| Model | Jamo S 809 floorstanding speaker |
|---|---|
| Frequency response | 37 Hz to 26 kHz (±3 dB) |
| Sensitivity | 90 dB (2.83 V at 1 m) |
| Power handling | 120 W / 240 W |
| Impedance | 8 ohms |
| Drivers | One 25 mm tweeter; three 127 mm woofers |
| Cabinet size | 1042 × 191 × 252 mm |
| Weight | 13.6 kg |
| Enclosure | Bass reflex, front-facing slot port |
Source: Jamo's S 809 listing, archived October 15, 2024. Published ratings describe this model; room performance depends on your setup.
Your setup checklist
0 of 6 checks complete
Checks are saved on this device. Reset clears ticks and custom checks.
Read the S 809 ratings in context
The numbers above come from Jamo's listing. They are not our lab results. The frequency range is the band Jamo lists within its stated tolerance. It does not tell you how much bass your room will have at your seat.
The power figures describe the speaker's rated handling. They do not set a minimum receiver wattage. Check your receiver's manual for supported speaker loads and wiring before use. Start at a low level when checking a new connection.
Work through the setup checks
Start with the model label on each cabinet. Similar names and matching finishes are not enough to prove that two speakers are the same model. Check the full model name before using a spec sheet or looking for parts.
Look for loose terminals, damaged drivers and unstable feet. Measure the space the whole speaker needs, including its feet and cables. The cabinet dimensions above do not establish safe clearance or the footprint of every fitted part.
Switch the receiver off before changing speaker wires. Match its channel labels to your layout. Keep loose wire strands from touching the other terminal. Use the manual for the exact speaker and receiver if a connection is unclear.
S 809 towers and separate height speakers
Jamo's listing describes top connection points for its separate S 8 ATM height module. The tower alone does not add a height channel. Check which speakers you actually have, which terminals serve them and which receiver channels you plan to use.
Choose positions from your room layout, then check every channel from your main seat. Do not copy another room's speaker count or receiver settings without checking your own gear. Our speaker placement guide can help plan the layout.
Keep a copy for your room
Tick each check as you finish it. Add tasks specific to your room, such as labelling a cable or leaving a door clear. Your browser saves the list on this device. Print it to keep a paper copy with your model and wiring notes.
About this reference
This independent reference preserves the main specifications from Jamo's archived model listing. It is useful for identifying speakers and planning setup. For repairs, mounting, wiring or warranty terms, use the documentation for the exact unit you own.